Accuracy Antigen Detection

Specification Intended Use The reagent is used to detect the HP antibody in serum / plasma / whole blood qualitatively. Helicobacter Pylori (HP) grows in gastric mucus deep layer, surface of gastric mucosa, and mostly in gastric antrum, gastric pit, epithelial deep fold and gland cavity. There...

Send Inquiry

Chat Now

Description

Technical Parameters

Test Procedure

Instructions must be read entirely before taking the test. Allow the test device controls to equilibrate to room temperature for 30 minutes (20°C -30°C) prior to testing. Do not open the inner packaging until ready, it must be used in one hour if opened (Humidity: 20%~90%, Temp: 10°C-50°C)

Strip and Cassette:

1. Take off the outer packing, put the strip/cassette onto the desk with the sample adding area of the strip/ sample well of the cassette up.

2. Serum / Plasma: Drop 1 drop (25μl) of serum or plasma vertically into the sample pad of strip/into the sample well of cassette. Add about 2 drops (80μl-100μl) of sample buffer onto the sample pad of strip /into the sample well of cassette.

3. Whole blood: Drop 2 drops (50μl) of whole blood vertically into the sample pad of strip/into the sample well of cassette. Add about 2 drops (80μl-100μl) of sample buffer onto the sample pad of strip into the sample well of cassette.

Result Judgment

POSITIVE: If two color bands are visible and the test band is equal to or darker than the control band,the FSH in the sample is at or above the detection sensitivity of 25 mIU/mL.

NEGATIVE: Only one color band appears on the control region or the test band appears but is lighter than the control band. The FSH concentration of the sample is below the detection sensitivity of 25 mIU/mL

INVALID: No red lines appear or control line fails to appear, indicating that the operator error or reagent failure. Verify the test procedure and repeat the test with a new testing device.