When it comes to centrifuge tubes, few people notice its existence, only when the sampling is found to be contaminated and it takes a whole day to add samples, they can't help but complain: for so many years, centrifuge tubes have not been aggressive at all!
You think that the centrifuge tube "does not strive for progress", in fact, you accidentally missed its growth!
Today, I will show you a new understanding of centrifuge tubes!
Since the birth of the first EP tube, various specifications of centrifuge tubes have emerged to meet the needs of the capacity.
From 0.6ml-5ml microcentrifuge tubes, to 15/50ml economical/standable centrifuge tubes, to 250/500ml small fat man large-capacity centrifuge tubes, they are widely used in life sciences and clinical experiments.
The cap of the centrifuge tube sampling and adding room was opened many times, which led to the destruction of the sample contamination experiment results. Presumably many experimenters have experienced this kind of collapse.
To solve this problem, we have revolutionized the centrifuge tube.
Through repeated running-in of various accessories and centrifuge tubes, the closed system of centrifuge tubes is grandly launched, joining the family of centrifuge tubes.
This new member has three stunts that will completely break your inherent impression of centrifuge tubes!
Stunt 1: TPE pipeline joins to realize fully closed system
The centrifuge tube is connected to a tube cover carrying a TPE pipeline, which avoids open operation and greatly reduces the risk of contamination during the liquid transfer process. verify.
The fully closed system can greatly save the sampling time, reduce the cost of use, and take the sampling in place in one step.
Stunt 2: Luer connector to help out, improve convenience and safety
Luer fittings are convenient connection devices used in the life science industry, and can be used in closed systems of centrifuge tubes to improve the convenience of use.
The male and female connection of the luer connector at the pipeline port of the closed system of the centrifuge tube can prevent accidental disconnection between pipelines during use and ensure the safety of use.
Stunt 3: Pre-assembly, double-packaging, and irradiation sterilization to achieve zero pollution
The tube cap is pre-installed on the centrifuge tube before the product leaves the factory, which can be used immediately, reducing the assembly time.
Double-layer packaging is adopted, and the product has been sterilized by electron beam irradiation with SAL=-6 before leaving the factory, which truly realizes aseptic biological product sampling and zero-contamination liquid transfer.
At the same time, the package is equipped with a common cover. After sampling, the cover with pipeline can be replaced with a common cover for subsequent centrifugation and analysis.
