This product uses medical special polyurethane sponge as raw material and is processed in a dust-free workshop. It has the advantages of extremely low dust emission, strong liquid absorption, soft and clean. The thermal emission technology makes the sampling head fixed on the ABS handle, avoiding the use of adhesives, the product is independently sealed and sterilized by radiation. The materials used in the sampling crown are non-toxic to microorganisms, which can greatly increase the collection and release of samples and improve the preservation effect of the samples during inspection.
Instructions for use: Hold the sampling swab with one hand, extend the sampling head into the cavity and place it on the position of the tooth, gently bite the upper and lower teeth for 15-20 seconds, so that the saliva in the deep mouth and the bottom of the tongue is absorbed by the sampling head , Gently remove the sampling swab. Then, hold the thin rod end of the sampling swab in one hand and the sleeve rod outside the sampling swab in the other, and push the sampling head into the centrifuge tube or other collection container to store the sample. The thin sampling rod and the set of rods are placed in the waste disposal bag provided by the medical institution.
