Introduction editing Voice
Briefly, PETG is a transparent plastic, a non-crystalline copolyester. The commonly used comonomer of PETG is 1,4-cyclohexane dimethanol (CHDM), which is called polyethylene terephthalate. Ester-1,4-cyclohexanedimethanol ester. It is the product of polycondensation of terephthalic acid (PTA), ethylene glycol (EG), and 1,4-cyclohexanedimethanol (CHDM). Compared with PET, it has more 1,4-cyclohexane. Alkylene dimethanol comonomer has more ethylene glycol comonomer than PCT. Therefore, the performance of PETG is very different from PET and PCT, and it has its uniqueness. So far, only Eastman of the United States and SK of South Korea are relatively mature in the world. The main domestic agents of Eastman PETG and SK PETG of South Korea are Shanghai Lianmo Chemical Co., Ltd. and so on. As the CHDM in the copolymer increases, the melting point decreases, the glass transition temperature increases, and the crystallinity decreases, and finally an amorphous polymer is formed. Generally, the content of CHDM in PETG is 30%-40%. It has good viscosity, transparency, color, chemical resistance, and resistance to stress whitening. It can be thermoformed or extrusion blow molded very quickly. The viscosity is better than acrylic (acrylic). PETG's products are highly transparent, good toughness, suitable for forming thick-walled transparent products, PETG has excellent processing and forming performance, and can be designed in any shape according to the designer's intention. It can use traditional extrusion, injection molding, blow molding and blister molding, etc. The molding method can be widely used in the market of plates, sheets, high-performance shrink films, bottles and profiled materials. At the same time, its secondary processing performance is excellent, and it can also be modified by conventional machining.
PETG product introduction editor Voice
PET resin is a linear homopolyester by polycondensation of glycol (ethylene glycol, EG) and dibasic acid (terephthalic acid, TPA), while copolyester is a polyester modified with alcohol or acid , There are PETG, PCTG and PCTA and degradable copolyester.
PETG is a non-crystalline copolyester. In its production process, since a certain amount of ethylene glycol is replaced by 1,4-cyclohexane dimethanol (CHDM), crystallization can be prevented, thereby improving manufacturing and transparency. Its products are highly transparent and excellent in impact resistance. It is especially suitable for forming thick-walled transparent products. Its processing and forming performance is excellent. It can be designed in any shape according to the designer's intention. It may use traditional extrusion, injection molding, blow molding and suction. Molding methods such as plastics can be widely used in the market of plates, sheets, high-performance shrink films, bottles and profiled materials. At the same time, it has excellent secondary processing performance and can be modified by conventional machining.
Main features of PETG
Outstanding thermoforming performance
PETG sheets are easy to produce products with complex shapes and large stretch ratios. Moreover, unlike PC board and impact-modified acrylic, this board does not need to be pre-dried before thermoforming. Compared with PC board or acrylic, its molding cycle is short, the temperature is low, and the yield is higher.
Toughness
The extruded sheet of PETG sheet is usually 15 to 20 times tougher than general acrylic and 5 to 10 times tougher than impact-modified acrylic. PETG sheet has sufficient bearing capacity during processing, transportation and use, which helps prevent cracking.
Weather resistance
PETG sheet provides excellent weather resistance. It can maintain the toughness of the product and prevent yellowing. It contains ultraviolet absorbers, which can be co-extruded into a protective layer to protect the board from the harmful effects of ultraviolet rays.
Easy to process
PETG sheet can be sawed, die-cut, drilled, punched, sheared, riveted, milled and cold-formed without breaking. Slight scratches on the surface can be eliminated with a hot air gun. Solvent bonding is also a normal operation. It is easier to process than general acrylic, impact modified acrylic or PC board, and can be processed for flocking, electroplating, static electricity and other processing.
Excellent chemical resistance
PETG sheet can withstand a variety of chemicals and common cleaning agents.
Environmental friendly
The PETG sheet substrates are all environmentally friendly materials, which meet the requirements of food contact management.
Economy
It is cheaper than a PC board, and it is more durable than a PC board.







