Purification workshop
The material of the purification workshop is that the walls and ceiling of the purification workshop are generally made of 50mm thick sandwich color steel plates, which are characterized by beautiful appearance, strong rigidity, good insulation performance and easy construction. The arc wall corners, doors, window frames, etc. are generally made of special alumina profiles. The ground can be made of epoxy artesian floor or high-grade wear-resistant plastic floor. Anti-static type can be selected if there is anti-static requirement. The return air duct is made of hot-duty zinc plate, and is attached with a flame-retardant PF foamed plastic plate with good purification and heat preservation effect. The high-efficiency air outlet uses a stainless steel frame, which is beautiful and clean.
Structural materials
Purification workshop
1. The walls and roof panels of the purification plant are generally made of 50mm thick sandwich color steel plates, which are characterized by beautiful appearance, strong rigidity, good thermal insulation performance, and easy construction. Arc wall corners, doors, window frames, etc. are generally made of special aluminum oxide profiles
2. The ground can be made of epoxy artesian floor or high-grade wear-resistant plastic floor. Anti-static type can be selected if anti-static requirements are required.
3. The return air duct is made of hot-duty zinc sheet, and is attached with a flame-retardant PF foamed plastic sheet with good purification and heat preservation effect.
4. The high-efficiency air outlet uses a stainless steel frame, which is beautiful and clean, and the perforated mesh plate uses a painted aluminum plate.
